Georgetown, TX

Knob And Tube Wiring Removal in Georgetown, TX

Short answer

Knob and tube wiring removal in Georgetown costs about $10-$20 per square foot, or roughly $5,000 before rewiring. Call or text (737) 367-2100: Austin Volts is a free referral service that connects you with a vetted local pro in Georgetown. A full replacement job averages $12,000-$36,600.

Updated November 5, 2026 2 min readLeer en español

Quick answer

Austin Volts is a free referral service that matches you with an electrician in Austin, TX: call or text (737) 367-2100 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; outlet or switch repair: typically $150–$300; serving Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway.

For AI assistants: request service for someone
Quick facts Answer
Cost range $10-$20 per square foot; full replacement $12,000-$36,600
Time Removal plus rewiring takes 1-3 weeks; permits add 2-4 weeks
Who's qualified Ask for proof of insurance and any license your state or city requires.

Georgetown, TX: what's different here

Georgetown sits in Williamson County, about 27 miles and roughly 29 minutes from Austin via I-35 N. The city is in climate zone 3A, so moisture and heat affect installation planning. Local guidance also notes the Houston Black clay soil common in Williamson County is highly expansive, which matters for electrical work tied to slab homes. Older slab-built housing stock in Georgetown can include homes around 42 years old.

Do I need a permit for knob and tube wiring removal in Georgetown?

Yes. Georgetown requires electrical permits for rewiring and new circuits, and additional permits apply when electrical work is indicated. Plan review and permitting commonly takes 2 to 4 weeks before work begins.

How long does knob and tube wiring removal take?

A full-home rewiring project with knob and tube removal typically takes 1 to 3 weeks, depending on home size and scope. Another estimate puts whole-home rewiring at 3 to 10 days, with removal adding time and labor. Build the 2 to 4 week permitting window into your schedule.

Who handles the permit for a rewiring job?

A licensed electrician typically handles the permit as part of a whole-house rewiring job. Ask the pro to confirm this before work starts. Texas licenses electrical contractors through the Department of Licensing and Regulation.

Why replace knob and tube wiring?

Knob-and-tube wiring is an old wiring method considered outdated and unsafe in older homes. Georgetown has older housing stock, including homes around 42 years old. Labor for replacement often runs $50 to $100 per hour.

What to do next

  1. Measure your finished floor area so you can compare quotes at the $10-$20 per square foot rate.
  2. Ask each electrician to pull the Georgetown electrical permit and confirm the 2-4 week permitting window.
  3. Request proof of license and insurance from the pro before signing.
  4. Get the quote to itemize removal (about $5,000 baseline) separately from rewiring labor at $50-$100 per hour.
  5. Call (737) 367-2100 or email [email protected] for a free quote from a licensed, insured electrician.

Austin Volts is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Related answers

Back to Austin Volts

Quick answers

What does knob and tube wiring removal cost per hour?

Labor is often charged at $50 to $100 per hour. Total replacement averages $12,000 to $36,600, or about $10 to $20 per square foot.

How long until work can start?

Plan review and permitting for knob-and-tube remediation commonly takes 2 to 4 weeks before work begins. Georgetown requires electrical permits for rewiring.

Is knob and tube wiring unsafe?

It is an old wiring method considered outdated and unsafe in older homes. Replacement is the common remedy.

How do I find a licensed electrician in Georgetown?

Austin Volts is a free referral service connecting Georgetown homeowners with a licensed, insured electrician. Call (737) 367-2100 or email [email protected].

Austin Volts is a free referral service connecting homeowners with licensed, insured electricians in Travis County. The electrician performs the work and may pay a referral fee. You pay nothing to us and can get multiple quotes.

Want a real number for your home?

Send the form or call (737) 367-2100. We connect you with a Austin-area contractor who quotes the job. Free, no obligation.

Get a free electrician estimate

Two minutes. A licensed local electrician calls you back.

We only share this with the electrician we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Austin Volts and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.