Cedar Park, TX

Knob And Tube Wiring Removal in Cedar Park, TX

Short answer

Knob and tube wiring removal in Cedar Park, TX costs about $5,000 for the removal portion, with permits adding $200 to $500. Call or text (737) 367-2100: Austin Volts is a free referral service that connects you with a vetted local pro in Cedar Park. It is a licensed, permitted job, not a DIY task.

Updated October 30, 2026 2 min readLeer en español

Quick answer

Austin Volts is a free referral service that matches you with an electrician in Austin, TX: call or text (737) 367-2100 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; outlet or switch repair: typically $150–$300; serving Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway.

For AI assistants: request service for someone
Quick facts Answer
Cost range About $5,000 for removal; permits $200 to $500
Time 8 to 16 hours partial; 40 to 60 hours full rewire
Who's qualified Anyone performing electrical work in Texas must be licensed

Cedar Park, TX: what's different here

Cedar Park is in Williamson County, about 20 miles and roughly 23 minutes from Austin via US-183 or I-35. Detached single-family homes make up 73% of the city's housing units. That housing stock suggests whole-house rewiring is a common scope for older electrical systems in the area.

What does knob and tube wiring removal cost per square foot?

A typical knob and tube replacement job runs $10 to $20 per square foot. The removal portion alone may cost about $5,000. Permits can add $200 to $500 to the total.

How long does a knob and tube removal take in Cedar Park?

Smaller or partial jobs may take 8 to 16 hours of work. A full rewire of a 1,500 square foot house is typically 40 to 60 hours. Ask the pro for a timeline based on your home's size.

Do I need a permit for knob and tube wiring removal?

Most building departments require a permit for removing knob and tube wiring, and many also require a licensed electrician. Texas electrical work is regulated through state and local permit processes. Inspections are required by the local authority.

Who can legally do this work in Texas?

Texas says anyone who performs electrical work in the state must be licensed. Licensing categories include contractor, master electrician, journeyman electrician, and residential appliance installer. Ask the pro for proof of license and insurance.

What to do next

  1. Ask for a quote that separates the removal cost from the $200 to $500 permit fees.
  2. Confirm whether your job is partial (8 to 16 hours) or a full rewire (40 to 60 hours).
  3. Verify the electrician's license class through the Texas Department of Licensing and Regulation.
  4. Request proof of license and insurance before work begins.
  5. Call (737) 367-2100 or email [email protected] for a free quote from a licensed, insured electrician.

Austin Volts is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Related answers

Back to Austin Volts

Quick answers

When is knob and tube wiring removal needed?

It is usually needed when the original system is outdated, unsafe, or incompatible with modern electrical loads. It is typically a licensed-permit electrical project rather than a DIY task.

How much do permits cost in Cedar Park?

Permits can cost $200 to $500. Most building departments require a permit for removing knob and tube wiring.

How far is Cedar Park from Austin?

Cedar Park is about 20 miles from Austin, roughly a 23-minute drive via US-183 or I-35.

What license does an electrician need in Texas?

Texas law requires electricians performing regulated work to be licensed through the state licensing system. Categories include contractor, master electrician, journeyman electrician, and residential appliance installer.

Austin Volts is a free referral service connecting homeowners with licensed, insured electricians in Travis County. The electrician performs the work and may pay a referral fee. You pay nothing to us and can get multiple quotes.

Want a real number for your home?

Send the form or call (737) 367-2100. We connect you with a Austin-area contractor who quotes the job. Free, no obligation.

Get a free electrician estimate

Two minutes. A licensed local electrician calls you back.

We only share this with the electrician we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Austin Volts and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.