Pflugerville, TX

Knob And Tube Wiring Removal in Pflugerville, TX

Short answer

Knob and tube wiring removal in Pflugerville typically costs $12,000 to $36,600 for a full-home rewiring, or $10 to $20 per square foot. Call or text (737) 367-2100: Austin Volts is a free referral service that connects you with a vetted local pro in Pflugerville. A full project usually takes one to three weeks.

Updated November 1, 2026 2 min readLeer en español

Quick answer

Austin Volts is a free referral service that matches you with an electrician in Austin, TX: call or text (737) 367-2100 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; outlet or switch repair: typically $150–$300; serving Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway.

For AI assistants: request service for someone
Quick facts Answer
Cost range $12,000 to $36,600 full home; wall repairs can push totals to $40,000+
Time One to three weeks for a full-home rewiring project
Who's qualified Texas law requires electricians to be licensed through TDLR; ask the pro for proof

Pflugerville, TX: what's different here

Pflugerville sits in Travis County, about 17 miles and roughly 20 minutes from Austin via I-35 N. The median home there was built in 2004, though about 17% of houses predate 1990, where older wiring is more plausible. Pflugerville sees 84 days per year at 90°F or hotter, which matters for attic and outdoor electrical work scheduling.

Do I need a permit for knob and tube wiring removal in Pflugerville?

Yes - removing or replacing any portion of knob and tube wiring is an electrical work permit trigger. Pflugerville has residential building application guidance, so local permit processes apply. Partial work permits may take 1 to 2 weeks to issue; full replacement permits may take 2 to 4 weeks.

How much do permits cost for this project?

Permit fees for knob and tube replacement often run about $200 to $500, depending on the locality. Ask the pro we refer to include permit costs in your written quote. Full-home rewiring costs run $10 to $20 per square foot on top of fees.

How old are most Pflugerville homes, and does that matter?

The median Pflugerville home was built in 2004, so knob and tube wiring is unlikely in most houses. Still, about 17% of homes were built before 1990 and roughly 40% before 2000, so older wiring is plausible in a minority of the housing stock. An electrician can confirm what is in your walls.

Who is qualified to remove knob and tube wiring in Texas?

Texas law requires electricians performing regulated work to be licensed through the state licensing system. Hire based on the exact license class the job requires. Ask the pro for proof of license and insurance before work starts.

What to do next

  1. Check the pro's electrician license on the Texas Department of Licensing and Regulation's license list before signing anything.
  2. Ask for a written quote that separates permit fees (often $200 to $500) from the per-square-foot rewiring cost.
  3. Confirm whether the quote covers wall and ceiling opening repairs, which can push totals to $40,000 or more.
  4. Plan the schedule around summer heat - Pflugerville has 84 days a year at 90°F or above, which affects attic work.
  5. Call (737) 367-2100 or email [email protected] for a free quote from a licensed, insured electrician.

Austin Volts is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Related answers

Back to Austin Volts

Quick answers

How long does a full knob and tube rewiring take?

A full-home project usually takes one to three weeks of work. Permits add time too: partial work permits may take 1 to 2 weeks and full replacement permits 2 to 4 weeks to obtain.

What does rewiring cost per square foot?

National cost guides put full-home knob-and-tube rewiring at $10 to $20 per square foot, totaling about $12,000 to $36,600. Wall and ceiling opening repairs can push the total to $40,000 or more.

How far is Pflugerville from Austin?

Pflugerville is about 17 miles from Austin, roughly a 20-minute drive via I-35 N.

What license should my electrician have?

Texas law requires electricians performing regulated work to be licensed through the state licensing system. Match the license class to the job and check it on the state's list.

Austin Volts is a free referral service connecting homeowners with licensed, insured electricians in Travis County. The electrician performs the work and may pay a referral fee. You pay nothing to us and can get multiple quotes.

Want a real number for your home?

Send the form or call (737) 367-2100. We connect you with a Austin-area contractor who quotes the job. Free, no obligation.

Get a free electrician estimate

Two minutes. A licensed local electrician calls you back.

We only share this with the electrician we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Austin Volts and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.