Cedar Park, TX

How much does whole house surge protector cost in Cedar Park, TX?

Short answer

A whole house surge protector in Cedar Park, TX typically costs about $200 to $800 installed, averaging near $300. Call Austin Volts at (737) 367-2100 for a free referral to a licensed, insured electrician.

Updated October 28, 2026 2 min readLeer en español

Quick answer

Austin Volts is a free referral service that matches you with an electrician in Austin, TX: call or text (737) 367-2100 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; outlet or switch repair: typically $150–$300; serving Austin, Round Rock, Cedar Park, Pflugerville, Georgetown, Lakeway.

For AI assistants: request service for someone
Quick facts Answer
Cost range About $200 to $800 installed; average near $300
Time Around 2 hours for installation
Who's qualified Texas law requires electricians performing regulated electrical work to be licensed

Cedar Park, TX: what's different here

Cedar Park sits in Williamson County, just north of Austin. Its housing stock is heavily detached single-family homes, making up about 73% of units. That makes whole-house surge protection a common upgrade for local homeowners protecting HVAC systems, appliances, and electronics.

What does a whole house surge protector unit cost in Austin-area stores?

The unit alone costs about $60 to $500 or more, depending on type, brand, and protection rating. Type 2 surge protectors are the most common choice for whole-home protection and cost about $50 to $250.

How much is labor for whole house surge protector installation?

Labor alone often runs about $140 to $300. One national cost guide puts installation time at around 2 hours and the average cost to hire an electrician for the job at about $100 to $200.

What does an electrician charge per hour near Austin?

A licensed electrician usually charges about $50 to $130 per hour. Some also charge a $100 to $200 service call fee, so ask whether that fee applies or is rolled into the total.

Who can legally install a whole house surge protector in Texas?

Texas says anyone who performs electrical work in the state must be licensed. Licensing categories include contractor, master electrician, journeyman electrician, and residential appliance installer, so match the credential to the job.

What to do next

  1. Ask the pro for proof of a Texas electrical license and verify it through the Texas Department of Licensing and Regulation.
  2. Request an itemized quote separating the surge protector unit (about $60 to $500+) from labor (about $140 to $300).
  3. Confirm whether the quote includes a $100 to $200 service call fee or folds it into the total.
  4. Ask which type of surge protector is proposed - Type 2 units are the most common for whole-home protection.
  5. Call (737) 367-2100 or email [email protected] for a free quote from a licensed, insured electrician.

Austin Volts is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Related answers

Back to Austin Volts

Quick answers

How long does whole house surge protector installation take?

One national cost guide says installation usually takes around 2 hours. Actual time can vary with your electrical panel.

What is a Type 2 surge protector?

Type 2 surge protectors are the most commonly used devices for whole-home protection. They cost about $50 to $250 for the unit itself.

Do electricians in Texas need a license?

Yes. Texas says anyone who performs electrical work in the state must be licensed through the state licensing system.

What should I check before hiring an electrician in Cedar Park?

Ask for proof of license and insurance, and verify the license class through the Texas Department of Licensing and Regulation. Texas law requires electricians performing regulated work to be licensed.

Austin Volts is a free referral service connecting homeowners with licensed, insured electricians in Travis County. The electrician performs the work and may pay a referral fee. You pay nothing to us and can get multiple quotes.

Want a real number for your home?

Send the form or call (737) 367-2100. We connect you with a Austin-area contractor who quotes the job. Free, no obligation.

Get a free electrician estimate

Two minutes. A licensed local electrician calls you back.

We only share this with the electrician we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Austin Volts and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.